| Configuration files for PC-programmable remotes will be made available here - All contributions welcome. | |
| User Instruction Sheet | manual.pdf(82K) |
| User instruction sheet for old Red-Eye Mark I | manual_old.pdf (130K) |
| Philips Pronto & Neo files | |
| Text file with RC6 code strings for programming remotes that allow RC6 codes to be manually entered | dtxcodes.txt (2K) |
| Basic Pronto CCFs (Code systems A and B) from Jason
Broad. Written for Pronto RU940. Should also be suitable for The Pronto RU890, Marantz RC5000, RC5000i, RC5200, Onkyo Chad, and Yamaha Rav-2000. The ProntoPro and Marantz RC9200 will also be able to load them but the users will only want the codes because they are colour so my CCF will look a bit dull to them. The only units in the series it is not compatible with is the Pronto Neo Marantz RC3200 and the New Pronto RU950. They use a different format called an NCF. There might be some conversion software I have never looked. they are very much in the minority anyway. |
Pronto_Basic.zip (14K) |
| Full Pronto CCFs (Code systems A and B) from Jason
Broad. I now have a complete set of Pronto CCFs for the Redeye There are 6 in total but I have combined them into 1 CCF with 6 panels. That way users only have to download one file and can discard any they don't want. Basic NTL Macros, Telewest Macros, Each of the above twice with A and B codes. Note : This file has been changed from the version Jason sent me, to increase the delay used for the one-touch channel selections from 100 to 200ms to be certain there was enough delay for reliable operation (I don't have a Pronto to check the exact timings). You may find that you can reduce the delay back to 100mS, but you should check that this also works for channel numbers with consecutive pairs of identical digits ('55' etc.) as the timing constraints are different for repeated codes. |
Pronto_full.zip (60K) |
| Pronto CCF from Robert Bridden This is an update to Jasons, including the film channels sports and more kids for NTL only |
pronto_ntl2.zip (60K) |
| CCF for PDAWin from Jason Southern This is a modified version of the basic CCF for use with PDAWin's TV Remote software. Since the software doesn't have embedded RC6 codes, they had to be taught to the controller. Now they're embedded in the CCF for anyone to use, or import the alias pad saving them going through the learning process. | pdawin.zip (7K) |
| NCF for Pronto Neo From Malcolm Smith NCF for the Pronto Neo. As neither Pronto2Neo or Neo Hacker will translate RC6 codes I had to use learned IR. As such some of the codes may have repeats, but all seem to work reliable. I've created some pages with channels on them (not tidy). As a pronto can have variable actions per button I've put 0.1s delays for different key presses and 0.2 if the same key is pressed twice. Seems to work very nicely. |
Neo_NTL_NCF.zip (30K) |
| CCF for Pronto including Telewest Silver remote Home and Guide
buttons Modified from Pronto_Basic. These extra key codes will only work on Red-Eye units with firmware revision 3 or greater. The firmware version is shown on the label on the rear of Red-Eye as a single digit in a square : 3 (Early units with no label are version 1.). These extra key functions are only recognised by Telewest STBs at present. |
Pronto_twsilver_A.zip (7K) |
| NCF for Pronto Neo - Telewest Silver remote NCF from Keith Hole | silverremote-redeye.ncf (22K) |
| Novii remote for Palm. From Stephen Richards. See readme.txt file in zip for installation instructions. | novii.zip (63K) |
| Harmon Kardon TC1000. From Adrian Clarke Here it is.
It uses the Astroshare program to dig the files out, which isn't part of the standard
software for the unit, but is generally available as freeware from remotecentral.com and similar. Anyone trying to
install will need the program to do it. The file is split into two parts (Cable and Cable
box 2) - it wouldn't let me learn them all in one go, don't know why. |
TC1000 cable.irm (7K) |
| Files for Control4 home
automation system. From Anthony Gallon at Control4. redremote_redeye.c4i - This is the Control4 driver written for the 'Redremote Redeye'. Any Control4 installer can use this file by copying it into the C:\Program Files\Control4\Composer\Drivers\virtual folder on their PC, it will then become available in the Control4 Composer software under "Cable" devices. They need to attach the 'Redeye' to the front of the Cable box and then attach our Infra red eye to the front of the 'Redeye'. redeye_raw_hex.doc - This is a list of all the raw Hex codes, each code has an alternate code so I have written them all on here for you. This is the original 'Word' file so people can cut and paste from here if needed. You can also make changes to this file if you need to. redeye_raw_hex.pdf - As above but a PDF conversion. |
redeye_raw_hex.doc |
| Any other contributions of files for Pronto or (especially) any other programmable remotes are most welcome. | |
| Miscellaneous downloads | |
| Instruction sheet for new style NTL remote. This is for the black IRDA version, the blue RC5 version is almost identical - some info re. multiplayer game functions removed. Page order is odd as it is a longer-than-A4 multi-folded, and was folded down to fit scanner. | newntlremote.pdf (1.6M) |